Under the brand - Nanosonic, Nanosonic india pvt. Ltd produce PA. Amplifier, PA Speaker System, Crossover Network, Microphones, Loudspeakers, Conference System, Audio Mixers, Cassette Player, Cassette Recorder.

Home

|

Profile

|

Product

|

Contact Us

 
 

Products PA Amplifier

SSA-250
250 WATTS AC & 24V DC Operation

FEATURES:-
  • 6 Mic & 2 Aux Inputs.
  • Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
  • Line Input for connecting the output from any external mixer or permitting SSA-250 to be used as a Booster Power Amplifier.
  • Resettable circuit breaker for protection against overload and short circuit.
  • Instant transfer to DC power (Car Battery) if AC power fails.
  • Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
SPECIFICATIONS SSA - 250
POWER OUTPUT

300W RMS Max., 250W RMS at 10% THD

220W RMS at 5% THD, 200W RMS at 2% THD

OUTPUT REGULATION < 2 dB, no load to full load at 1kHz
INPUT CHANNELS

6 x Mic 0.65mV / 4.7mΩ, 2 x Aux 100mV / 470kΩ

1 x Line 1V / 50kΩ

FREQUENCY RESPONSE 50 - 15, 000Hz + 3dB
SIGNAL TO NOISE RATIO 60dB
TONE CONTROLS Bass: + 10dB at 100Hz, Treble: + 10dB at 10kHz
OUTPUTS Preamp 200mV / 600Ω, Line 1V / 1kΩ
SPEAKER OUTPUTS 4Ω, 8Ω, 70V εt 100V
POWER SUPPLY AC: 220- 240V 50 / 60Hz DC: 24V (2x12V Car Battery)
POWER CONSUMPTION AC: 500VA DC: 6A
DIMENSIONS W450 x H160 x D340mm
NET WEIGHT 16.Okg

SSA-5000
500 WATTS AC & 36V DC Operation

FEATURES:-
  • 7 Mic & 2 Aux Inputs.
  • Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
  • Line Input for connecting the output from any external mixer or permitting SSA-5000 to be used as a Booster Power Amplifier.
  • Resettable circuit breaker for protection against overload and short circuit.
  • Instant transfer to DC power (Car Battery) if AC power fails.
  • Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
SPECIFICATIONS SSA - 5000
POWER OUTPUT

750W RMS Max., 500W RMS at 10% THD
450W RMS at 5% THD, 415W RMS at 2% THD

OUTPUT REGULATION < 2dB, no load to full load at 1kHz
INPUT CHANNELS

7 x Mic 0.8mV/ 4.7kΩ, 2 x Aux 100mV / 470 kΩ
1 x Line 1V / 50kΩ

FREQUENCY RESPONSE 50-15,000Hz +3dB
SIGNAL TO NOISE RATIO 60dB
TONE CONTROLS Bass: +10dB at 100Hz, Treble: + 10dB at 10kHz
OUTPUTS Preamp 200mV/ 600Ω, Line 1V / 1kΩ
SPEAKER OUTPUTS 4Ω, 8Ω, 70V / εt 100V
POWER SUPPLY AC: 220- 240V 50 / 60Hz DC: 24V (2x12V Car Battery)
POWER CONSUMPTION AC: 1000VA DC: 8A
DIMENSIONS W510 x H172 x D385 mm
NET WEIGHT 24.5kg

TZA-4000
400 WATTS AC & 24V DC Operation

FEATURES:-
  • 6 Mic & 2 Aux Inputs.
  • "Stereo" Music Operation for DJ programmes.
  • Facilitates connection and operation of two separate groups of speakers simultaneously on "Mono" mode. Ideal for Places of Worship.
  • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
  • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
  • Resettable circuit breaker for protection against overload and short circuit.
  • Instant transfer to DC power (Car Battery) if AC power fails.
SPECIFICATIONS TZA - 4000
POWER OUTPUT

300w + 300w RMS Max., 200w + 200w RMS at 10%THD
180w +180w RMS at 5% THD,165w +165w RMS at 2% THD

OUTPUT REGULATION  < 2 dB, no load to full load at 1kHz
INPUT CHANNELS

Mono 6x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ
Stereo L / R 200mV/100kΩ, Line L /R 1V 50kΩ

FREQUENCY RESPONSE 50- 15, 000Hz + 3dB
SIGNAL TO NOISE RATIO 60dB
TONE CONTROLS Bass: + 10dB at 100Hz, Treble: + 10dB, at 100Hz
OUTPUTS Preamp 200mV / 600Ω, Line 1V / 1kΩ
SPEAKER OUTPUTS 4Ω, 8Ω, 70V εt 100V for each zone
POWER SUPPLY AC: 220 - 240V 50/60Hz DC: 24V (2x12V Car Battery)
POWER CONSUMPTION AC: 700VA DC: 4.5A
DIMENSIONS W 510 x H 172 x D 385 mm
NET WEIGHT 22.3kg

TZA-1500
160 WATTS AC & 12V DC Operation

FEATURES:-
  • 6 Mic & 2 Aux Inputs.
  • Preamplifier output for connecting to a Booster Amplifier and for recording the programme.
  • Bass & Treble Controls.
  • TZA-1500 permits connecting 100V (LMT) type speakers to one Zone and low impedance type speakers to other Zone without causing overloading and over heating.
  • Instant transfer to DC power (Car Battery) if AC power fails.
  • Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
SPECIFICATIONS TZA - 1500
POWER OUTPUT

100W + 100W RMS Max., 80W + 80W RMS at 10% THD

70W + 70W RMS at 5% THD, 60W + 60W RMS at 2% THD

OUTPUT REGULATION < 2 dB, no load to full load at 1kHz
INPUT CHANNELS

6 x Mic 0.6mV/4.7kΩ, 2 x Aux 100mV/470kΩ

FREQUENCY RESPONSE 65 - 15, 000Hz + 3dB
SIGNAL TO NOISE RATIO 60dB
TONE CONTROLS Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
OUTPUTS Preamp 200mV/600Ω
SPEAKER OUTPUTS 4Ω, 8Ω, 70V εt 100V for each zone
POWER SUPPLY AC: 220 - 240V 50/60Hz DC: 12V (12V Car Battery)
POWER CONSUMPTION AC: 300VA DC: 3A
DIMENSIONS W460 x H155 x D310.mm
NET WEIGHT 14.2kg

TZA-2000
200 WATTS AC & 24V DC Operation

FEATURES:-
  • 6 Mic & 2 Aux Inputs.
  • TZA-2000 is ideal for medium sized installations such as in places of worship where two separate groups of speakers are needed to be connected.
  • User has a choice to connect both the zones to 100V (LMT) type speakers, or 100V speakers to one zone and low impedance type speakers to the other zone. Both the zones can also be connected to low impedance type speakers.
  • Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Preamplifier output for recording.
  • Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Zone On/Off facility.
  • Resettable circuit breaker for protection against overload and short circuit.
  • Instant transfer to DC power (Car Battery) if AC power fails.
SPECIFICATIONS TZA - 2000
POWER OUTPUT

130W + 130W RMS Max., 100W + 100W RMS at 10% THD
90W + 90W RMS at 5% THD, 80W + 80W RMS at 2% THD

OUTPUT REGULATION < 2dB, no load to full load at 1kHz
INPUT CHANNELS

 Mono 6x Mic 0.6mV/4.7kΩ, 2 x Aux100mV/470kΩ

Stereo L / R 250mV / 47kΩ

FREQUENCY RESPONSE 50 - 15, 000Hz + 3dB
SIGNAL TO NOISE RATIO 60dB
TONE CONTROLS Bass: -10dB at 100Hz, Treble: +10dB at 10kHz
OUTPUTS Preamp 200mV/600Ω, Line 1V / 1kΩ
SPEAKER OUTPUTS 4Ω, 8Ω, 70V εt 100V for each zone
POWER SUPPLY AC: 220 - 240V 50/60Hz DC: 24V (2x12V Car Battery)
POWER CONSUMPTION AC: 700VA DC: 4.5A
DIMENSIONS W500 x H140 x D340 mm
NET WEIGHT 17.4kg

Next

 

Nanosonic India pvt. Ltd